Meadows Vertical Edgers
 |
 |
 |
|
Meadows 3-saw Vertical Edger with 40-hp electric motor drive and independent hydraulic power source |
||
Meadows
Vertical Edgers are available with 2-saws or 3-saws. In the 2-saw format
both saw collars shift independently. In the 3-saw format the bottom saw
and the middle saw shift independently. The top saw is attached to the
middle saw by a fixed width spacer. The fixed width spacer can be provided
for any width cut. Meadows vertical edgers are available with electric
motor drive or mandrel driven configurations. A 40-hp electric motor is
standard with the electric drive configuration, although larger electric motors
can be provided at an additional charge. All Meadows vertical edgers
include a welded steel frame with an adjustable base for easy mounting.
All Meadows vertical edgers come standard with 2 15/16" diameter double-key
mandrel. The mandrel is turned down to 2 3/16" and is fitted with
Dodge Type E bearings. The float shaft, or shifting rod, on the back of
the vertical edger is 2 3/16" diameter. The saw shift on all Meadows
vertical edgers is hydraulic. Meadows utilizes 2" bore hydraulic
cylinders to enable the saw shift. A Meadows vertical edgers installed on
a Meadows sawmill will use the hydraulic system found on the sawmill.
Those vertical edgers installed on another brand of sawmill will be equipped
with an independent hydraulic power source that is mounted on the vertical
edger. The independent power source includes a 10-gallon tank and
pump. The pump is belt driven from the mandrel of the vertical
edger. All Meadows vertical edgers are equipped with 20" diameter
inserted tooth saws. Controls are included with all Meadows vertical
edgers.
Meadows Board Edgers | Meadows Combination Edgers | Miner Edgers
Prices subject to change without notice.
Send mail to meadowsmills@charter.net
with questions or comments about this web site.
Copyright © 2001 Meadows Mills, Inc.
Meadows Mills, Inc.
P.O. Box 1288
North Wilkesboro, NC 28659
800-626-2282 or 336-838-2282
Last modified: July 12, 2007