|
 |
|
|
|
MINER 3-31 STATIONARY EDGER |
|
 |
|
| Miner Model 3-31 Stationary Board Edger Shown with 25-HP Gasoline Engine (also available with electric motor or diesel engine) | |
| SPECIFICATIONS FOR MINER MODEL 3-31 STATIONARY BOARD EDGER | |
| Feed speed | 90 feet per minute |
| Board width maximum | 30 3/4 inches |
| Maximum distance between saws | 18 inches |
| Board thickness maximum | 3 inches |
| Mandrel speed RPM | 2,900 RPM |
| Saw diameter | 12 inches |
| Saw collar diameter | 4 1/4 inches |
| Mandrel diameter | 1 15/16 inches |
| Pressure roll diameter | 4 1/2 inches |
| Feed roll diameter | 2 1/4 inches |
| Infeed table length | 5 feet 4 inches |
| Outfeed table length | 7 feet 6 inches |
| Table width | 31 inches |
| Overall length | 16 feet |
| Standard model has door on left side | |
 |
|
 |
|
| MINER 3-31 PORTABLE EDGER |
 |
| Miner Model 3-31 Portable Board Edger Shown with Diesel Engine (also available with 25-hp gasoline engine). Standard model has door on left side. All specifications are the same as stationary edger. |
|
MINER 53-SERIES BOARD EDGERS |
||
|
|
||
|
Miner Model B-53 Board Edger, Shown with Manual Press Roll Lift |
||
| SPECIFICATIONS FOR 53-SERIES BOARD EDGERS | Model A-53 |
Model B-53 |
| Feed speed | 142 feet per minute |
142 feet per minute |
| Maximum board width | 26 3/4 inches |
30 3/4 inches |
| Maximum distance between saws | 12 inches | 18 inches |
| Maximum board thickness | 4 inches | 4 inches |
| Mandrel speed | 2,100 RPM | 2,100 RPM |
| Saw diameter | 14 inches | 14 inches |
| Saw collar diameter | 4 1/4 inches | 4 1/4 inches |
| Mandrel diameter | 1 15/16 inches | 1 15/16 inches |
| Pressure roll diameter | 4 1/2 inches | 4 1/2 inches |
| Feed roll diameter | 2 1/4 inches | 2 1/4 inches |
| In-feed table length | 5 feet 4 inches | 5 feet 4 inches |
| Out-feed table length | 7 feet 10 inches | 7 feet 10 inches |
| Table width | 27 inches | 31 inches |
| Overall length | 16 feet | 16 feet |
| Power requirements (electrical) | 25 to 35 HP | 25 to 35 HP |
Number of saws |
2 | 2 |
Welded steel frame is constructed from 8 inch channel and includes precision laser cut side plates. |
||
|
||
|
||
Send mail to sales@meadowsmills.com
with questions or comments about this web site.
Copyright © 1997-2010, Meadows Mills, Inc., All rights reserved
Meadows Mills, Inc.
PO Box 1288
1352 West D Street
North Wilkesboro, NC 28659
Toll Free 1-800-626-2282
Telephone 336-838-2282
Fax 336-667-6501
Last modified: April 12, 2012
