
Meadows Material Handling Fans
![]() |
![]() |
![]() |
Meadows #2 Material Handling Fan, may be belt driven or direct driven
Meadows
industrial material handling fans feature open-type radial-blade fan wheels and
are well suited for installations involving exhaust, material conveying,
pollution control, air circulation, and a variety of other industrial
applications. Each fan wheel is statically and dynamically balanced on
electronic equipment prior to being assembled in the fan. In addition,
each material handling fan is tested at or near operating speed after assembly
and the balance is fine-tuned as a complete assembly. The open-type
radial-blade fan wheel design is extremely rugged using heavy gauge steel
components which are jig assembled for accuracy and consistency. All fan
wheels are assembled using precision laser-cut steel spiders and armor plate
paddles. All fan wheels are welded with care to insure the maximum in
strength and reliability. Meadows material handling fans are available in six sizes,
with fan wheel diameters from 9" to 29".
Meadows material handling fans may be belt-driven or direct-driven. The
belt-driven configuration allows the motor to be mounted in any of the four
standard motor positions. The direct-driven configuration uses a fan shaft
and motor direct coupled via a flexible coupling. The integral motor
sub-base is fabricated of heavy gauge steel and securely reinforced for
rigidity. All material handling fans are available in either clockwise or counter-clockwise rotation.
The direction of rotation is determined from the drive side the material
handling fan. Sixteen (16) exhaust positions are available. All
Meadows material handling fans have a replaceable wrapper between the side
plates and have a removable cover plate for easy removal and replacement of the
fan wheel. All Meadows material handling fans utilize pre-lubricated, heavy-duty
flange bearings.
| Model | |||||||
| Item | #1, Belt Driven | #1, Direct Driven | #2 | #3 | #4 | #5 | #6 |
| Price | $550.00 | $935.00 3-phase, $1,340.00 single-phase | $1,300.00 | $1,390.00 | $1,490.00 | $2,600.00 | $3,600.00 |
| Fan Wheel Size: Diameter x Width x Number of Blades | 9" x 2 3/4" x 4 | 9" x 2 3/4" x 4 | 16" x 5 1/4" x 6 | 16 1/2" x 6 1/8" x 6 | 18" x 6 1/2" x 6 | 20" x 8 1/4" x 6 | 29" x 10" x 6 |
| Recommended Operational RPM | 3,000 to 3,600 | 3,600 | 3,000 to 3,600 | 3,000 to 3,600 | 3,000 to 3,600 | 3,000 to 3,600 | 2,000 to 2,200 |
| Recommended Horsepower | 2 to 5 | 3 | 5 to 10 | 10 to 20 | 20 to 40 | 25 to 50 | 50 to 100 |
| Shaft Diameter | 1 1/8" | 1 1/8" | 1 11/16" | 1 11/16" | 1 11/16" | 2 3/16" | 2 3/16" |
| Inlet Diameter | 5" | 5" | 6" | 8" | 10" | 12" | 15" |
| Outlet Diameter | 4" | 4" | 6" | 7" | 8" | 10" | 12" |
| Bearing Type | SXR 1" 2-bolt Flange Bearing | Fan wheel mounted on motor shaft, no bearings | SXR 1 11/16" 2-bolt Flange Bearing | SXR 1 11/16" 2-bolt Flange Bearing | SXR 1 11/16" 2-bolt Flange Bearing | RCJO 2 3/16" 4-bolt Flange Bearing | RCJO 2 3/16" 4-bolt Flange Bearing |
| Crated Weight, Fan Only | 100 | 200 | 350 | 375 | 400 | 600 | 900 |
Prices subject to change without notice.
|
|
![]() |
| Meadows Model #1 Material-Handling Fan, Belt Driven | Meadows Model #1 Material-Handling Fan, Direct Driven with 3-hp Electric Motor |
Send mail to meadowsmills@charter.net with questions or comments about this web site.
Copyright © 1997 Meadows Mills, Inc.
Meadows Mills, Inc.
P.O. Box 1288
North Wilkesboro, NC 28659
800-626-2282 or 336-838-2282
Last modified: April 23, 2008