Stone burr mills in the Centennial family are available with 20 inch or 30 inch diameter millstones. Rates of production are up to 400 pounds per hour for the 20 inch stone burr mill and up to 1,000 pounds per hour for the 30 inch stone burr mill. Stone burr mills in the Centennial family are typically used in intermediate to large mills and bakeries.
The housings surrounding the millstones are precision laser-cut from stainless steel. The bearings are mounted sealed roller bearings. The shaft in the 20 inch stone burr mill is 1 11/16 inches diameter, turned ground and polished. The shaft in the 30 inch stone burr mill is 2 3/16 inches diameter, turned ground and polished. The 20 inch stone burr mill requires a 10-hp 1,750-rpm electric motor and operates at 692-rpm. A 10-hp electric motor is available for use with either a single-phase or 3-phase electrical supply. The 30 inch stone burr mill requires a 25-hp 1,750-rpm electric motor and operates at 637-rpm. A 25-hp electric motor is available for use with only a 3-phase electrical supply. A 2-bushel stainless steel hopper is included with each stone burr mill in the Centennial family. The feed tray is fabricated from stainless steel. Stone burr mills in the Centennial family do not include a grain cleaning screen, therefore, any grain or corn to be processed in these stone burr mills must be cleaned prior to processing.
Meadows stone burr mills 16 inch and larger may be configured so that flour discharges either through a discharge spout that is cut into the side of the housings which surround the millstones or into a materials handling fan. The materials-handling fan conveys the flour from the stone burr mill through a short length of 4 inch diameter pipe into a materials collector. The flour falls from the materials collector into a sifter, a bagging system, or a brute. Brutes are containers which may be used to collect and store flour. Optional items include a magnetic motor starter, amp meter, v-belt drive with guard, casters, 0 to 200 degree thermometer, materials-handling fan, materials collector, filter bag dust collection system, and 4 inch diameter pipe to either connect the materials-handling fan to the materials collector.
Stone burr mills in the Centennial family are shipped by common carrier, crated, and include a parts list and operator's instructions. The approximate domestic shipping weight of the 20 inch stone burr mill is 2,250 pounds. The approximate international shipping weight of the 20 inch stone burr mill is 2,750 pounds. The approximate domestic shipping weight of the 30 inch stone burr mill is 3,250 pounds. The approximate international shipping weight of the 30 inch stone burr mill is 3,750 pounds. To receive a quotation for shipment please contact us by telephone or by email. When requesting a rate quotation please provide the city, state, and zip or postal code to which the stone burr mill will be shipped.
|The thrust and locking handle controls the
texture of the grind
|Belt guards for main drive and
materials-handling fan drive
|Stainless steel feed tray with shut-off
shown on Centennial stone burr mill
|Welded steel motor mount shown with
25-hp electric motor and drive with guard
|Meadows stone burr mills can be side
discharge or may be equipped with a
materials-handling fan, as pictured above
|Meadows size #1 materials collector with
filter bag dust collection system
|Overview of 30" Centennial Stone Burr Mill
with materials-handling fan, 4" pipe,
size #2 materials collector, and filter bag
dust collection system
|Agitation mechanism for feed assembly||Stainless steel hopper and feed assembly on
Centennial stone burr mill